博文

What is an Aerodrome Beacon? An aerodrome beacon is a light beacon installed at an airport or airfield to provide visual guidance to pilots approaching the airport. It typically consists of a rotating or flashing light that is visible from a distance, and is usually located near the airport’s control tower or on the airport’s perimeter.

图片
  What is an Aerodrome Beacon? An aerodrome beacon is a light beacon installed at an airport or airfield to provide visual guidance to pilots approaching the airport. It typically consists of a rotating or flashing light that is visible from a distance, and is usually located near the airport’s control tower or on the airport’s perimeter. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960

CDT provide renewable and solar helipad lighting units, helping operators reduce their carbon footprint while maintaining safety protocols and meeting international regulations. In particular, our solar-powered units provide an effective solution for smaller airfields in remote areas where the use of traditional power supplies is not possible.

图片
  CDT provide renewable and solar helipad lighting units, helping operators reduce their carbon footprint while maintaining safety protocols and meeting international regulations. In particular, our solar-powered units provide an effective solution for smaller airfields in remote areas where the use of traditional power supplies is not possible. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960

A Heliport Beacon is required where long range visual guidance is needed and not provided by any other means, or where the location of the helipad is difficult to identify due to surrounding lights. CDT LED Location & Identification Beacon provides visual clues as flashes / Morse Code that can easily be identified and simply followed even when concentrating on flying an advanced aircraft.

图片
  A Heliport Beacon is required where long range visual guidance is needed and not provided by any other means, or where the location of the helipad is difficult to identify due to surrounding lights. CDT LED Location & Identification Beacon provides visual clues as flashes / Morse Code that can easily be identified and simply followed even when concentrating on flying an advanced aircraft. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960

Heliport Lighting System - Lighted Windsock used to indicate the wind direction and its intensity to helicopter operator & Rotating Beacon designed primarily for night operation as identification and location markers for heliports.

图片
  Heliport Lighting System - Lighted Windsock used to indicate the wind direction and its intensity to helicopter operator & Rotating Beacon designed primarily for night operation as identification and location markers for heliports. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960 hashtag # ICAO hashtag # heliportlighting

Inset perimeter lights for the heliport provide visual indications for correct and safe helipad landing and take-off. They can be configured for different purposes and with different colors, the emitting color is usually green, white, amber, or blue, marking for touch-down and lift-off areas, final approach and take-off areas, or as flight path alignment guidance lights, aiming point lights, taxiway edge lights.

图片
  Inset perimeter lights for the heliport provide visual indications for correct and safe helipad landing and take-off. They can be configured for different purposes and with different colors, the emitting color is usually green, white, amber, or blue, marking for touch-down and lift-off areas, final approach and take-off areas, or as flight path alignment guidance lights, aiming point lights, taxiway edge lights. Perimeter lights cannot be taller than 25cm and must be recessed if they are considered an obstacle to proper take-off operations. It is certified ICAO-compliant and the IP68 protection class allows flexibility in the climatic conditions of the place of installation. The NVG option is also available and the shallow bases are included. The full flush version is preferred for helipads with no thrusting operations. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960 hashtag # heliportlighting hashtag # helipadlighting

Internally/Externally Lighted Windsock/Wind Cone Assembly for aviation applications at airports, heliports, and industrial applications, provides reliable wind direction and wind speed indication. The external lighting unit illuminates the windsock from above with 4 floodlights. The internal lighting unit consists of a swivel equipped with two heavy-duty stainless steel bearings, providing illumination from within the windsock. All lighted windsock assemblies are equipped with a low-intensity obstruction light and are available for 100-240VAC, 6.6A, or solar power supply. Also available with fixed or tilted poles, these models are suitable for a range of site conditions.

图片
  Internally/Externally Lighted Windsock/Wind Cone Assembly for aviation applications at airports, heliports, and industrial applications, provides reliable wind direction and wind speed indication. The external lighting unit illuminates the windsock from above with 4 floodlights. The internal lighting unit consists of a swivel equipped with two heavy-duty stainless steel bearings, providing illumination from within the windsock. All lighted windsock assemblies are equipped with a low-intensity obstruction light and are available for 100-240VAC, 6.6A, or solar power supply. Also available with fixed or tilted poles, these models are suitable for a range of site conditions. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960 hashtag # windsock hashtag # windcone

Heliport Acquisition Beacon, flashing an omnidirectional white Morse Code “H” (group of 4 flashes), for the identification of heliports in difficult surroundings or to provide long-range guidance to the heliport and assist landing.

图片
  Heliport Acquisition Beacon, flashing an omnidirectional white Morse Code “H” (group of 4 flashes), for the identification of heliports in difficult surroundings or to provide long-range guidance to the heliport and assist landing. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960 hashtag # heliportlighting hashtag # helipadlight