CDT Heliport Light/Airport Lamps

LED Heliport Perimeter light 110-240 VAC 6.6A Omnidirectional Heliport Lights - 8″ Perimeter Light TLOF INSET A lighting system for the Touchdown and Lift-Off (TLOF) area must be present in every heliport where night operations are conducted. TLOF lighting system is composed of green omnidirectional lights located on the TLOF boundaries: a minimum of 14 lights for round areas or minimum of 4 lights for square areas (maximum distance between beacons must not exceed 3 meters). KEY FEATURES  * Based on LED technology  * GREEN light - Steady burning  * Intensity available: 30cd  * Long life time >10 years life expectancy  * Low consumption  * Lightweight and compact  * Degree of Protection: IP68  * No RF-radiations  * Easy to install  * ICAO Certificated For more details: Website:http://www.cdt-en.com/ Email:sophia@chendongtech.com Phone/WhatsApp:+86-13929493960

  TLOF perimeter lights shall be placed along the edge of the area designated for use as the TLOF or within a distance of 1.5 m from the edge. TLOF perimeter lights shall be uniformly spaced at intervals of not more than 3 m for elevated heliports and helidecks and not more than 5 m for surface-level heliports. There shall be a minimum number of four lights on each side including a light at each corner. For a circular TLOF there shall be a minimum of fourteen lights. The TLOF perimeter lights shall be fixed omnidirectional lights showing Green or White. At a surface-level heliport, ASPSL or LPs shall emit Green or White light when used to define the perimeter of the TLOF. Adjusting the intensity (brightness) fixed lights 100%, 30% and 10% are appropriate. CONSTRUCTION AND OPERATION REGULATIONS FOR HELIPORTS The Operator must define and implement a maintenance program, which, where necessary, includes thepreventive maintenance, in order to maintain the infrastructure and systems of ...

A signalization FATO system (Final Approach and Take-Off area) is required for heliport with a big operation surface, for take off and helicoper Landing. The FATO lights, when they are present, is required if night operation are present. The system is composed by lights with white omnidirectional emission, located on the perimeter of heliport. In some case, where the Landing are is reduced, the FATO area and the TLOF one are the same and the green lights are used.  The FATO area can be circular (in this case are required a minimum of 10 lights installed with a max distance of 5 meters one from the other) or square (in this case are required a minimum of 4 lights for each side, including the ones in the corners, and installed at a max distance of 50meters one from the others). TECHNICAL FEATURES  * Based on LED technology  * White steady burning light   * Intensity: 100cd  * Long life time >10 years life expectancy  * Low consumption  * Lightwei...

Heliport Perimeter Light is used for night operation. To use omnidirectional green perimeter light lighten the heliport TLOF/FATO edge area. TLOF lighting system always consist of elevated/flush perimeter lights and floodlighting. Custom solutions is available like operation voltage, color white, yellow, blue, red. For more details: HUNAN CHENDONG TECH CO., LTD Tel:  +0086-0731-85563265                                    Fax: +0086-0731-85563365 Phone/WhatsApp:  +0086-13929493960                Skype:  sophia.guo88 Email:  sophia@chendongtech.com                         Website:  http://www.cdt-en.com/    Compliance - ICAO Annex 14, Volume II, 4th Edition, July,  2013   - FAA  AC150/5390-2C - CAP 437;Offshore helicopter landing areas; Feb 20...

FAA L-807 L-806 Internally LED Lighted Windsock, 7m Center-Hinged Mast Illuminated Wind Cone with Obstruction Light for Airport, Heliport A windcone is a carefully designed fabric cone that is mounted on a metal frame. This metal frame is attached to a vertical pole via a swivel that allows the fabric cone to rotate freely. The fabric cone must be designed to provide relative wind speed indication. A fully extended windsock indicates a wind speed in excess of 15 knots. An illuminated windcone must be powered in some manner. Common methods are with 120VAC/240VAC or 6.6Amp circuitry. Recent advances in both LED and solar power technology have allowed for the creation of reliable and compliant solar powered LED windsocks. Wind Direction Indicators or wind cones provide visual surface wind direction and velocity information to pilots in flight or on the ground at airport and heliports. We based our wind cone portfolio on FAA specifications Options:  1. Fabric Windsock: * Size 1- 1.2m l...